WIRELESS PIR SENSOR

This is a wireless passive infrared sensor that will transmit a wireless signal to the telephone dialer whenever an intruder enters an unauthorized area. This unit detects the heat from the person as they move into the area covered. The sensor will cover an area of about 40' by 40'. Several transmitters may be used to monitor different locations. The PIR sensor operates by a 9 volt battery.

WIRELESS TEMPERATURE SENSOR

The temperature alert sensor detects a temperature drop or rise. This unit works well when used in conjunction with the dialer to monitor homes, stores, outbuildings, etc when you are away. In the event of  a heat rise or loss the sensor will activate the dialer to alert the proper parties. The sensor's range  is from -20 degrees to 110 degrees F and may be adjusted to the high and low  temperatures you require.

The wireless door contacts may be mounted on any door and will activate the dialer when the door is opened. The contacts, which use a 9 volt battery, work well with the dialer because they make full use of entry and exit delay on the dialer.

WIRELESS HANDHELD TRANSMITTER

This small transmitter , which uses  a 9 volt battery, can be carried in a pocket or purse. It can activate dialer up to 300 feet away. It may also be used as a panic button to summon for help for those store with limited security that operate late hours, such as convenience stores.

SIREN

The 12 volt DC siren can be plugged into the dialer and will sound when sound when activated. The siren is designed for exterior us and could be used to scare off an intruder.

TIMER/ LIGHT CONTROL

The timer control , when activated by our wireless drive alert, is normally used for security reasons. It has the ability to turn on lights, bells, horns, etc that can be set to stay on from one minute to 60 minutes and then will shut off automatically. The control unit has an on/off switch for use your convenience. Installation is very easy- just plug in the timer into a standard wall outlet, then  plug the timer line cord into the drive alert bell receiver. The timer control can turn on up to 660 watts of light.               

LOUD RINGING BELL

This 6" bell can be used with any of the driveway alarms. It can be used outside or inside for people with hearing problems. When used in conjunction with the light/timer control it may be programmed to ring up to one hour.        

LINE CARRIERS

These are designed to send a remote signal from one building to another, providing that all locations are downstream from one power transformer. Plug the transmitter into a 110 volt outlet in one building, and throughout your existing power lines, it will trip the receiver in another building. The transmitter can be activated by a driveway alarm. A loud bell or light plugged into the receiver would be activated.